Fɛn dilannenw ka ɲɛfɔli kunbaba

Plastic Painting Production Line ye funteni-curing system ye min bɛ se ka kɛ fɛn caman na, baarakɛminɛn minnu tɛ{1}}nɛgɛ ye. A bɛ fɛn caman -plasitiki bɛnkan jira, anti-deformation gradient curing, ani profesɛriw ka buguri bɔli, ka surface coating solution nafama, musaka-nafama di.

Fɛɛrɛko ɲɛfɔli

Taabolo / Sisεmεti	Paramɛtiri Item (Paramɛtiri Item).	Fɛɛrɛko ɲɛfɔli
Furakɛli ɲɛfɛ & Baarakɛcogo Sistɛmu	Degreasing & Saniyali	Saniya min tɛ funteni dɔgɔya-, degere 40–55
Furakɛli ɲɛfɛ & Baarakɛcogo Sistɛmu	Surface Activation (Surface Activation) ye	Plasma / Tasuma furakɛli, surface tension Ka tɛmɛ walima ka bɛn 42 mN/m ma
	Elimination Statique (Elimination Statique) ye	Iyɔn fiɲɛ douche + static elimination bars, voltage A ka dɔgɔn walima a bɛ bɛn 200 V ma
Lamini kɔlɔsili siratigɛ la	Lamini sariyaw	23 ± 2℃, 60 ± 5% RH, ISO Kalasi 8 saniyaso
	Filɛli kɛcogo sariya	G4 + F8 + H13 filɛri saba-ta, baarakɛcogo Ka bon walima ka bɛn 99,97% ma @ 0,3 μm
Sistɛmu min bɛ kɛ ni kuran ye	Atomizer Paramètres (Atomizer Paramètres) ye	Teliya 30.000–70.000 RPM, tension 60–100 kV
	Filimu ka bonya	A daminɛ na: 15–25 μm; Sanfɛla : 20–40 μm; muɲuli ye ±3 μm ye
	Transfert Efficiency (Jɛkulu ka baarakɛcogo ɲuman).	A ka bon walima a bɛ bɛn 82% ma .
Sistɛmu min bɛ furakɛli kɛ ni funteni ye	Gradient Curing (Gradient Curing) funteni hakɛ	Taabolo fɔlɔ : degere 60–70 ; Taabolo 2nan : degere 80–100
	Funteni hakɛ kelen-kelen	±2℃, fiɲɛ funteni-fiɲɛ laminicogo

Plastiki Ja dilanni taabolo

An ka plastiki penti layini bɛ dugukolo labɛncogo, fiyɛli tigitigi, ani furakɛli kɔrɔsilen fara ɲɔgɔn kan ka kɛ otomatiki baarakɛcogo ye min bɛ taa ɲɛ. Etape kelen-kelen bɛɛ bɛ kɔlɔsi kosɛbɛ walasa penisilini ka nɔrɔ kosɛbɛ, ka a to a dacogo ka kɛ kelen ye, ani ka a to a yɔrɔ ka kɛ cogo kelen na.

Doni → Saniya ka kɔn-ka ɲɛ → A bɔli cogo la → Surface activation → Buguri bɔli → Primer fiyɛli → Niveli → Topcoat Spraying → Leveling → Gradient Curing → Cooling → Inspection & Rework → Downloading

Minɛnw & Sistɛmu kunbabaw

Furakɛli ɲɛfɛ & baarakɛcogo yɔrɔ:Saniya tankiw minnu tɛ se ka baara kɛ kosɛbɛ ani plasma/tasuma robow minnu bɛ baara kɛ kosɛbɛ walasa ka dugukolo sanfɛla fanga kɔlɔsi kosɛbɛ.

Spray Booth saniyalen:ISO Class 8 saniyaso min kɔnɔ fiɲɛbɔlan caman-stage ani fiɲɛbɔlanw bɛ sɔrɔ u yɛrɛma.

Fiyɛli kɛcogo ɲuman-Precision:Marifa minnu bɛ wuli ka bɔ jamana wɛrɛw la minnu bɛ wele ko rotary bell/air spray guns ani multi-axis painting robots walasa ka fɛnw jiginni nafa bonya.

Foro Curing Smart: 1. Bamako, Mali.Funteni kɔlɔsili tila-tilalen min bɛ funteni dɔgɔya-funteni jiginni sabatili sabati ani funteni kelen-kelen gɛlɛn.

Conveying & Control Sistɛmu:Sanfɛ cakɛda walima skid conveyors (teliya 4--15m/min) faralen ɲɔgɔn kan ni PLC ani cɛmancɛ HMI ye walasa ka kɔlɔsili kɛ otomatiki sira dafalen na.

Aplikasi minnu bɛ kɛ

So kɔnɔ minɛnw sow (telewisɔn karamɔgɔya, fiɲɛdilan pannew, frigo bɔgɔlanw, a ɲɔgɔnnaw)

3C Elektroniki Sow (Ordinatɛriw ka bɔgɔlanw, smart hardware casings) .

Mobili kɔnɔna plastiki yɔrɔw (Minɛnw pannew, cɛmancɛ konsolɛw, da sɔgɔlanw, a ɲɔgɔnnaw)

Dɔgɔtɔrɔso plastiki fɛnw & Don o don mɔgɔw ka plastiki fɛnw

Industri Plastic Enclosures ani kɛnɛma fini wɛrɛw minnu tɛ-kɛnɛba-kɛnɛya ka se ultra-kɛnɛba-kɛnɛya ma

Furakɛcogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

Ɛntɛrinɛti kalanni:Ka kɛɲɛ ni i ka baarakɛminɛnw hakɛ ye, u seko, penti suguya, ani izini labɛncogo.

Sani-feere Ladilikan:Fɛɛrɛko dɔnnikɛlaw ka bilasirali, taabolo simulatigɛ, layidu ja, ani baarakɛnafolo bolodacogo.

Izini taamaw:Fɛnɲɛnɛmaw taamaw ani benchmark line inspections bɛ sɔrɔ ni ɲinini kɛra.

Jogoɲumanya Sɛgɛsɛgɛli fɛnw & sariya labatoli

Adhesion & Film Épaisseur: 1. Bamako, Mali.A bɛ baara kɛ ni cross-cut tape tests (ASTM D3359) ye walasa ka sirili fanga ni tigitigi jateminɛnanw sɛgɛsɛgɛ walasa ka a jira ko layɛrɛw bɛ se ka laɲiniw dafa (Primer: 15–25 um; Topcoat: 20–40 um, ±3 um).

Surface Energy Sɛgɛsɛgɛli:A bɛ baara kɛ ni dyne pens walima contact angle baarakɛminɛnw ye walasa ka a jira ko plastiki yɔrɔ minnu furakɛra ka kɔn, olu bɛ se ka surface tension sɔrɔ min ka bon walima min bɛ bɛn 42 mN/m ma.

Muɲuli & Baara kɛcogo:A bɛ baarakɛminɛn dafalenw jateminɛ kɔgɔ fiyɛli fɛ, funteni sɔgɔli fɛ, sɔgɔli fɛ, ani kemikɛli kɛlɛli sɛgɛsɛgɛliw fɛ walasa ka dannaya sɔrɔ waati jan kɔnɔ.

Seereyaw jɔnjɔnw:A sɛgɛsɛgɛra ISO 9001/14001/45001 sariyaw kɔnɔ ani a dɛmɛna ni fɛn dilanni patenti 3 ye, porogaramuw sɛbɛnnikɛlaw ka josariyaw 7, ani utilité model patent 57.

Ɲininkaliw

J: Plastiki jumɛnw bɛ bɛn nin ja dilancogo ma?

A: A ɲɛnabɔra ka ɲɛ diɲɛ bɛɛ ka nɔrɔli kama PP, ABS, PC, PS, PA, ani plastiki ɲagaminen suguya caman kan ni plasma/tasuma baarakɛcogo laɲininen ye ( A ka bon walima a bɛ bɛn 42 mN/m surface tension ma).

J: Sistɛmu bɛ plastiki yɔrɔ finmanw-kogo finmanw ka funteni jiginni bali cogo di?

A: A bɛ baara kɛ ni furakɛli foro ye min ka dɔgɔn -funteni jiginni na (60–100℃, ±2℃uniformity) ni funteni kurulenw ye minnu bɛ kɛ ka kɛɲɛ ni plastiki suguya wɛrɛw ye (ABS, PP, PC) walasa ka funteni degun ni wulicogo dɔgɔya.

J: Fiyɛlilan saniya hakɛ ye mun ye?

A: A bɛ baara kɛ ISO Kalasi 8 saniyayɔrɔ la ni G4 + F8 + H13 saba-filɛri ye ( A ka bon walima a bɛ bɛn 99,97% baarakɛcogo ɲuman ma 0,3 μm na) ani ion fiɲɛbɔlanw.

J: Otomatiki fiyɛli kɛcogo ka transfert efficiency ye mun ye?

A: A bɛ penti jiginni nafa sɔrɔ min ka bon ni 82% ye walima min bɛ bɛn 82% ma ni penti robow ye minnu bɛ se ka fɛn caman kɛ ani ni marifaw ye minnu bɛ wuli ni teliya ye - (30.000–70.000 RPM).

J: Conveyor system ka bɔli teliya danma ye mun ye?

A: A bɛ ni sanfɛ cakɛda walima skid conveyors ye minnu bɛ baara kɛ ni teliya ladilanen ye min bɛ se mɛtɛrɛ 4 fo 15 ma miniti kɔnɔ, u bɛ don ɲɔgɔn na pewu ni PLC ni HMI otomatiki ye.

J: Yala aw bɛ turn-key engineering solutions di ka kɛɲɛ ni aw yɛrɛ sago ye wa?

A: Ɔwɔ, dilancogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ kɛ ka kɛɲɛ ni i ka baarakɛminɛn hakɛ ye, i ka laɲini seko, penti suguya (solvant walima ji la), ani izini labɛncogo.

Tags hot .: plastiki penti layini, Sinuwa plastiki penti layini dilannikɛlaw, feerekɛlaw, izini